The NiSi V7 100mm Filter Holder Kit with True Color NC CPL and Lens Cap is the most advanced 100mm filter holder we have ever created, with a refined design based on feedback from photographers. The V7 allows for the easy use of up to three 100mm wide, 2mm thick filters along with an included brand new NiSi True Color Circular Polarizer Filter, and has no vignetting at 16mm with wide-angle lenses on full-frame.
It is made from aviation-grade aluminum with single element processing by CNC machine, and the matte black frosted finish on the surface minimizes reflections. The V7 kit comes complete with the 100mm filter holder, an ultra-slim True Color CPL, four adapter rings for the most popular wide-angle lenses (67mm, 72mm, 77mm, and 82mm), a lens cap, and a storage pouch. The V7 features a unique rotation wheel design, so the CPL filter can be rotated independently with filters still in place via a cog on the back of the filter holder.
This version of the V7 features the brand new True Color CPL that prevents the yellow cast introduced from most CPLs. The True Color CPL features our proprietary NiSi Pro Nano Coating helping to reduce unwanted reflections and provides a waterproof and oil-resistant layer to assist in the cleaning of unwanted fingerprints, dust, and water stains.
Our new Point to Point CPL Design allows for easier guided installation of the CPL into the main 82mm adapter. By lining the white markers on the CPL up with the white mark on the main adapter and twisting, you can easily secure the CPL in place, and remove it with little effort.
Our unique clip system is designed to grip only along the edges of the filter avoiding contact with the surface of the filter. Filters are easy to insert, and contact with a filter’s main surfaces are avoided, particularly when using graduated filters, whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.
Use of the NiSi V7 100mm Filter Holder can be easily accomplished by first screwing the included 82mm adapter ring onto a lens with 82mm front filter threads. Step-up rings are included to allow the adapter ring to be used with lenses that have 67mm, 72mm, or 77mm front filter threads, with additional step-up rings available separately for lenses with 49mm, 52mm, 55mm, 58mm, or 62mm front filter threads. After being fitted onto the adapter ring, the filter holder’s pull-and-release locking pin helps to provide a reliable connection that allows the holder to be rotated 360°. To further secure the position of the filter holder, it features a lock that can be activated by rotating a small wheel around the release pin which prevents any rotation of the filter holder.
Adapter rings for lenses with 86mm or 95mm front filter threads are also separately available. The combination of either of those adapter rings with the filter holder cannot accommodate a NiSi 86mm circular polarizer filter; however, a polarization effect can instead be obtained by placing a separately available, 100mm wide, 2mm thick polarizer filter between one pair of the filter holder’s slots.
The V7 kit includes a push-on lens cap that will protect the CPL while still connected to a lens and a padded holder pouch for safe storage and transport.